Page 1 of 2
[2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 07, 2016 10:17 am
by Support
We're glad that PrimoCache desktop edition 2.6.0 is released now!
You may download it from the following page.
https://www.romexsoftware.com/en-us/pri ... nload.html
For the change log, please see
https://www.romexsoftware.com/en-us/pri ... gelog.html
Thank you for all your kind support!
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Fri Nov 11, 2016 9:13 am
by points
I was hoping this new version would solve my issue here:
https://www.romexsoftware.com/bbs2/en-u ... =33&t=4077
Unfortunately it didn't. Is there anything to expect to solve it?
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Fri Nov 11, 2016 9:37 am
by Support
@points, I'm sorry that I forgot to follow up that topic. So far PrimoCache only works on the volume level, it cannot work if an encrypted disk has no volumes shown.
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Sun Nov 13, 2016 11:28 pm
by Babel17
Just me or did the GUI take a turn for the worse? I didn't mind having to adjust the width of the columns so I could read them. But on the main status page some of them can't be widened and remain largely unreadable. And the buttons up top have shrunk. I'm on 3840 x 2160 UHD Sony TV/monitor so maybe you didn't account for that? The older version was fine though.
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 14, 2016 2:42 am
by Support
Can you make a screenshot or take a photo for the error things?
And what's your Windows version? 32bit or 64bit?
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 14, 2016 2:51 am
by Support
You can download the v2.5.0 GUI program from the following link. It's ok to just replace the v2.6.0 GUI program.
For 64bit Windows
https://www.romexsoftware.com/download/ ... ncyCcV.exe
For 32bit Windows
https://www.romexsoftware.com/download/ ... ncyCcV.exe
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 14, 2016 3:11 am
by Babel17
support wrote:Can you make a screenshot or take a photo for the error things?
And what's your Windows version? 32bit or 64bit?
Windows 10, 64bit. Here's a screenshot.
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 14, 2016 3:17 am
by Support
How about if you right click on the execute file and set the compatibility mode to "Windows vista" in the "Compatibility" tab?
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 14, 2016 3:18 am
by Babel17
Thanks, that works great, and my eyes thank you as well!
I also replaced the new GUI in the program folder with this one, so I still can just click on my desktop shortcut for the GUI to come up.
Re: [2016-11-07] PrimoCache 2.6.0 released!
Posted: Mon Nov 14, 2016 3:21 am
by Babel17
support wrote:How about if you right click on the execute file and set the compatibility mode to "Windows vista" in the "Compatibility" tab?
I just now tried that, and all the other modes, but it made no difference.