Hello,
i got new bug with last version 0.6.2
i'll post detailed debug later... (have to go work lol)
when writing something to the disk and trying to access it directly after write the file is not found i got a delay of some seconds before the file is available... it make some softs/install buggy...
Let me know
Thanks
here is my config
Access file just after write bug... - Solved ! Topic is solved
Access file just after write bug... - Solved !
Last edited by intika on Wed Aug 03, 2011 1:33 am, edited 1 time in total.
Re: Access file just after write bug...
a little weird...
We have compared the code changes between FC0.61 and FC0.62. Can't find any clue so far.
Anyway, I'd like to know the detail info as this post
viewtopic.php?f=26&t=813&start=10
PS. How long did you use FC0.61? Perhaps we can try FC0.61 again to make sure if the issues only happen with FC0.62 or not.
Thanks.
We have compared the code changes between FC0.61 and FC0.62. Can't find any clue so far.
Anyway, I'd like to know the detail info as this post
viewtopic.php?f=26&t=813&start=10
PS. How long did you use FC0.61? Perhaps we can try FC0.61 again to make sure if the issues only happen with FC0.62 or not.
Thanks.
Re: Access file just after write bug...
Hello,
Sorry to answer now but i have a lot of work at this moment...
For this bug i'm making bunch test to see when it's happen exactly...
and actually i could only reproduce the error like this :
1. while using torrent download with vuze last version to e: (cached system)
2. Copying big file (50 GB) from e: to external USB HDD
3. Installing "ArcSoft TotalMedia Theatre v5 Trial" to c: (cached system)
4. The installation show bug while trying to access "just copied file" indicting file not found
5. i had to wait some seconds and ask the installation to retry...
6. it's not a buggy computer problem cause when doing all this the computer respond correctly
Configuration :
- For e: same config with 1024 Mb and 64 KB
System :
Laptop HP HDX16
Chipset Mobile Intel PM45 Express
CPU Intel P9700 2.8 Ghz
HDD Hitashi 7200x 500 GB SATA (no raid)
I putted a capture of the HDD Config
Boot partition is the first one, the used system is in the second
Used System : Seven 32 Bit Ultimate
Ram : 8 GB DDR2
GPU : NVIDIA GeForce 9600M GT 512 RAM
I did not get the problem with 6.1 version i used it all the time from it came out till 6.2
No hardware change since 1 years
Thanks...
Sorry to answer now but i have a lot of work at this moment...
For this bug i'm making bunch test to see when it's happen exactly...
and actually i could only reproduce the error like this :
1. while using torrent download with vuze last version to e: (cached system)
2. Copying big file (50 GB) from e: to external USB HDD
3. Installing "ArcSoft TotalMedia Theatre v5 Trial" to c: (cached system)
4. The installation show bug while trying to access "just copied file" indicting file not found
5. i had to wait some seconds and ask the installation to retry...
6. it's not a buggy computer problem cause when doing all this the computer respond correctly
Configuration :
- For e: same config with 1024 Mb and 64 KB
System :
Laptop HP HDX16
Chipset Mobile Intel PM45 Express
CPU Intel P9700 2.8 Ghz
HDD Hitashi 7200x 500 GB SATA (no raid)
I putted a capture of the HDD Config
Boot partition is the first one, the used system is in the second
Used System : Seven 32 Bit Ultimate
Ram : 8 GB DDR2
GPU : NVIDIA GeForce 9600M GT 512 RAM
I did not get the problem with 6.1 version i used it all the time from it came out till 6.2
No hardware change since 1 years
Thanks...
Last edited by intika on Tue Jul 12, 2011 9:29 am, edited 1 time in total.
Re: Access file just after write bug...
Thank you, intika.
We'll follow your steps to see if we can reproduce the issue or not.
We'll follow your steps to see if we can reproduce the issue or not.
Re: Access file just after write bug...
Hello,
i'am trying to debug this issue and it seems that fc is not responsible... don't loose time with it i'll post once again when i finish my tests...
Any way thanks
i'am trying to debug this issue and it seems that fc is not responsible... don't loose time with it i'll post once again when i finish my tests...
Any way thanks
Re: Access file just after write bug...
Well noted your information below with many thanks. We wait for your test results.
intika wrote:i'am trying to debug this issue and it seems that fc is not responsible... don't loose time with it i'll post once again when i finish my tests...
Re: Access file just after write bug... - Solved !
Hello,
Thanks for the quick replay...
The problem is solved (seems to be after all tests)
i'am verry happy that fancy cache still compatible with my complex machine... !! if it's okay with my machine it will be with all looool
The problem came from a windows update that changed the kernel to v6.1.7601.17592 (ntkrnlpa.exe) and update of some system file
My kernel file was spoiled... may be after a crash and chkdsk did not solve the problem... i got to uninstall all update from 2 moth ago, cleaning the system and update once again and checking, checksum and integrity of my kernel file... and it seems that this solved the problem... so it was a microsoft bug may be caused by a blue screen or bad reboot or else
any way i'am verry happy to get my machine clean at 100% and with fc enabled
Any way thanks to be there and for your help
Thanks for the quick replay...
The problem is solved (seems to be after all tests)
i'am verry happy that fancy cache still compatible with my complex machine... !! if it's okay with my machine it will be with all looool
The problem came from a windows update that changed the kernel to v6.1.7601.17592 (ntkrnlpa.exe) and update of some system file
My kernel file was spoiled... may be after a crash and chkdsk did not solve the problem... i got to uninstall all update from 2 moth ago, cleaning the system and update once again and checking, checksum and integrity of my kernel file... and it seems that this solved the problem... so it was a microsoft bug may be caused by a blue screen or bad reboot or else
any way i'am verry happy to get my machine clean at 100% and with fc enabled
Any way thanks to be there and for your help
Re: Access file just after write bug... - Solved !
I am glad to hear it!
Re: Access file just after write bug... - Solved !
i am happy that the issue is solved cause every issue with fc make me really cause it's complicated and it take a lot of time to debug...
Any way i could say Fancy Cache 0.6.2 is really an R.C. version !!!!!!!!! really really good job !!! thanks !
Any way i could say Fancy Cache 0.6.2 is really an R.C. version !!!!!!!!! really really good job !!! thanks !